Solenoid valves are essential components for the precise control of liquids and gases in industrial processes. They enable reliable shut-off and automation in applications such as heating technology, mechanical engineering and the process industry. Our selection includes pilot operated and positively operated diaphragm valves in various designs – for maximum flexibility and safety.
| Feature | MV1355 to MV1362 | MV1363 to MV1367 | MV1381 to MV1382 | MV1383 to MV1387 | MV1411 to MV1415 |
| Control system | Pilot-operated, de-energized closed, compact design | Pilot-operated, de-energized closed, large nominal sizes | Pilot-operated, de-energized opening, compact design | Pilot-operated, de-energized open, ATEX-compliant | Positively driven, closed when de-energized, no minimum pressure |
| Nominal pressure | PN 16 | PN 16 | PN 16 | PN 16 | PN 14 |
| Nominal size | G 3/8″ to G 1/2″ | G 3/4″ to G 2″ | G 3/8″ to G 1/2″ | G 3/4″ to G 2″ | G 3/8″ to G 1¼” |
| Kv value (l/min) | 60 to 70 | 140 to 750 | 60 to 70 | 140 to 750 | 20 to 120 |
| Temperature | -10 °C to +140 °C | -10 °C to +140 °C | -10 °C to +90 °C | -10 °C to +140 °C | -10 °C to +90 °C |
| Gasket | NBR / FKM | NBR / FKM / EPDM | NBR (optional FKM) | NBR / FKM / EPDM | NBR + PA |
| Special feature | Pilot-operated, compact | Large nominal sizes | Open without voltage | ATEX-compliant | No minimum pressure |
Pilot-controlled and force-controlled for different applications
for space-saving installation
For use in harsh environments
according to DIN EN ISO 228-1
Quickly available
We offer you a comprehensive range of solenoid valves from well-known manufacturers – with flange or socket connection, for direct and alternating current. The valves are available in direct, servo and force-controlled versions and cover nominal sizes from DN15 to DN300. They are suitable for liquid and gaseous media and are manufactured from high-quality materials.
You will find a wide selection of industrial valves and accessories for a wide range of applications in our valve trading area. Our service team is always available to provide you with individual advice and help you select the right solution.
Pilot-operated diaphragm valves use the medium pressure to open and close and therefore require a minimum pressure differential – the series MV1355–MV1367 and MV1381–MV1387 work on this principle. Direct-acting diaphragm valves such as the MV1411–MV1415 series expressly require no minimum operating pressure according to the data sheet and therefore work from 0 bar – the right choice for unpressurised lines, drain lines and applications with low inlet pressure.
De-energised closed (MV1355–MV1367, MV1411–MV1415) means: if the power fails, the valve shuts – the safe normal position for feed and dosing lines. De-energised open (MV1381–MV1387) keeps the line open in the event of a power failure, which makes sense for cooling and relief lines.
The valves shut off gaseous and liquid media provided these are compatible with the materials used – typically water, compressed air and gas oil. NBR is used as the sealing material, in individual series NBR in combination with PA. The medium temperature ranges from −10 °C to +90 °C, and individual versions are approved up to +140 °C; the operating pressure differential is up to 16 bar depending on the series. At sub-zero temperatures it must be noted that freezing medium can damage the valve.
All series are of compact construction, can be mounted in any installation position and have standard-compliant connections. The solenoid coils achieve protection class IP65; the MV1383–MV1387 series is additionally ATEX-compliant and meets RoHS. Typical fields of application are industrial automation and heating technology.
Air, water, inert gases as well as mineral oils, gasoline and gas oil.
Yes, variants with FKM or EPDM gasket up to +140 °C.
Yes, certain models are ATEX-compliant.
Yes, all valves can be installed as required.
Yes, replacement coils, diaphragms and special options are available.
